Introduction

This document will help with the understanding of the CAD Tree structure for parent/child relationships to manipulate models – like the positioner.

Open the CAD Tree

First, open the CAD tree to add models.

CAD Tree menu

This is the CAD Tree menu, which you can expand by highlighting what you want to expand and hit the asterisk key on your keyboard number pad.

After Expanding the tree by hitting the asterisk, you will start moving, (SET POSITION), of the station frames to their correct locations. Set S1 to center of main sweep axis and S2 to side A center and S3 to side B center. You will need to hide the crossbeam and flash divider models to see the centers of drives.

S3 S2 S1   

 Attaching the Models

Next, you will attach the appropriate models to each axis to control the positioner.