DX200 AIR PANEL INSTRUCTIONS FOR Analog specification: EtherNet / IP communication (R0)

September 09, 2026 20:06
Updated

1.1. System Configuration

2. Basic Specification

2.1. Basic Specification

2.2. Outline Drawing

2.3. Air Distribution Diagram

2.4. Elementary Wiring Diagram

2.5. Signal assignment

3. Installation

3.1. Installing on DX200

3.2. In the case of a single AIR PANEL

4.1. Cable connection

4.2. Air connection

5. How to operate

5.1. Preparation for use of I / F panel and dedicated JOB

5.2. How to operate the I / F panel

5.2.1. Operation preparation of the I / F panel

5.2.2. Manual output

5.2.3. Move to a registered posture

5.2.4. Discharge amount measurement

5.2.5. Cleaning

5.2.6. Management function

5.2.7. Other functions

5.3.1. Setting painting conditions by macro command

5.3.2. Setting painting conditions by PAINTSET command

6. Maintenance and Inspection

6.1. Inspection Schedule

7. Recommended Spare Parts

7.1. Spare parts

Comments

0 comments

Article is closed for comments.