DX100 OPTIONS OPERATOR’S MANUAL FOR WELDCOM FUNCTION: ARC WELDING/DIGITAL I/F FUNCTION (R2)

September 08, 2026 13:08
Updated

1 Functional Overview

TCP Speed Function

2.2 DX100 System Software Upgrade

2.2.1 Individual data backup

2.2.2 System Upgrade

2.3 Setting and Confirmation of Hardware Configuration

2.3.1 Removing Unnecessary EW Board

2.3.2 Station Number when EW Board is Left

2.4 Connection of Welding Power Source and DX100

2.4.1 Standard Connection (When connecting one welding power source of digital interface to DX100)

2.4.2 When Connecting to DX100 the Multiple Welding Power Sources of Digital Interfaces and also Other Devices with Data Transmission Function using Ethernet Function

2.5 System Configuration

2.5.1 I/O Module Setting Check after Changing EW Board Station Number Setting

2.5.2 Setting of Optional Function “Network Function”

2.5.3 Setting of Optional Function “WELDCOM Function”

2.5.4 Detailed Setting of Welding Power Source

2.5.5 I/O Module Setting Check after Adding Virtual EW Module

2.5.6 Optional parameters for Fronius TPS

3 Operation of Welding Condition File Edit Window

3.2 Display of Welding Condition File Edit Window

3.3 MOTOWELD Type: Operation of Top Window

3.4 MOTOWELD Type: Operation of Weld type Window

3.5 MOTOWELD Type: Operation of Customize Window

3.6 MOTOWELD Type: Operation of Maintenance Window

3.7 MOTOWELD Type: Operation of Welder Parameter Window

3.8 FroniusTPS Type: Operation of Top Window

3.9 FroniusTPS Type: Operation of Program No. setting Window

3.10 FroniusTPS Type: Operation of Param. setting Window

4 Job Preparation for Welding

4.1 Job Preparation for Welding

5 Alarm and Error

Comments

0 comments

Article is closed for comments.