YRC1000micro OPTIONS INSTRUCTIONS EtherNet/IP COMMUNICATION FUNCTION (FOR STANDARD LAN PORT) (R6)

September 14, 2026 20:33
Updated

1 Introductions

1.1 System Configuration

1.1.1 System Configuration Example

1.1.4 Message Communication

1.1.5 IO Communication by InputOnly

1.1.6 Message Communication Using CIP

2 Board Specifications

3 How to Connect Communication Cable

3.1 Mounting the EtherNet/IP (CPU board) to YRC1000micro

4 EtherNet/IP Function Setting

4.1.1 Window Composition

4.2 Setup Procedure

4.2.1 Calling the SETUP Window for the EtherNet/IP (CPU board)

4.2.2 Setting the Device Information List

4.2.3 General Setup for the EtherNet/IP (CPU board)

4.2.4 Adapter Setting

4.2.5 Scanner Setting

4.2.6 IO Module Re-configuration

4.2.7 External I/O Setup

4.2.8 LAN Interface Setting

4.3 IO Assignment Example

4.3.1 Setting ExclusiveOwner Communication

4.3.2 Setting InputOnly Communication

4.4 Communication Data

4.4.1 YRC1000micro IO Data Allocation

4.5 Communication Status

4.6 Managing Setting Data

4.6.1 How to Save Data

4.6.2 How to Load Data

4.7 Creating an EDS File

4.7.1 Creating Procedures of EDS File

4.7.2 Maintenance Mode Settings and EDS File Contents

4.8 Communication Monitor Window

5 Message Communication

5.1 Conventional Message Communication

5.2 Message Communication Using CIP

5.2.1 Details on Commands for Message Communication Using CIP

5.3 Related Parameters

Comments

0 comments

Article is closed for comments.