2.2 Shipping Bolts and Brackets
3.1 Installation of Safeguarding
3.2 Mounting Procedures for Manipulator Base
3.3.2 Fixing the Manipulator Base
3.3.3 Precautions to Prevent the Manipulator from Falling
4.2 Manipulator Cable Connection
4.2.1 Connection to the Manipulator
5.2 Part Names and Working Axes
5.3 Manipulator Base Dimensions
5.4 Dimensions and P-Point Maximum Envelope
6 Allowable Load for Wrist Axis and Wrist Flange
7.1 Peripheral Equipment Mounts
7.2 Internal User I/O Wiring Harness and Air Hose
8 Electrical Equipment Specification
8.1 Location of Limit Switches
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
9.3 Notes on Grease Replenishment/Exchange Procedures
9.3.1 Grease Replenishment/Exchange for S-axis Speed Reducer
9.3.2 Grease Replenishment/Exchange for L-axis Speed Reducer
9.3.3 Grease Replenishment/Exchange for U-axis Speed Reducer
9.3.4 Grease Replenishment for R-axis Speed Reducer
9.3.5 Grease Replenishment for B-Axis Speed Reducer
9.3.6 Grease Replenishment for T-axis Gear
9.3.7 Grease Replenishment for R-axis Gear
Comments
0 comments
Article is closed for comments.