EtherNet/IP Card INSTRUCTIONS MANUAL (R2)

September 14, 2026 20:43
Updated

1.1 System Configuration

1.1.1 Functionality of the AppliconIO® EtherNet/IP Master

1.1.2 Functionality of the AppliconIO® EtherNet/IP Slave

1.2 Reference Documentation

1.3 Customer Support Information

2 Hardware Specifications

2.1 Card Components

2.1.1 PCU-ETHIO Board

2.1.2 PCU-ETHIO Cabling and Indicators

3.1.1 Board Settings

3.1.2 Card Installation

3.2 Card Configuration

3.3 Configuration

3.3.1 Definition of Terms and Screenshots

3.3.2 HOST SETUP Screen

3.3.3 HOST SETUP Screen (Continued / Farther down)

3.3.4 Setup with DHCP

3.3.5 Configuration Example #1 - Robot as Slave to ControlLogix PLC

3.3.6 Configuration Example #2 - Robot as Master on Ethernet/IP Network

3.3.7 Monitoring the Network Status through the DX100 Teach Pendant:

4 Network Configurations and Connections

Comments

0 comments

Article is closed for comments.