YRC1000 SUPPLEMENTARY INSTRUCTIONS PRESS APPLICATIONS : PH200R/PH200RF (R5)

October 13, 2026 20:29
Updated

1.1 About this instruction

2 Controller Specification

2.1 Controller Type

2.2 Dimension Diagram

2.3 Arrangement of Units and Circuit Boards

2.5 Signal Flow

2.6 Equipment Configuration

3 Product Confirmation

3.1 Order Number Confirmation

4.1 Handling Procedure

4.2 Using a Crane to Move the Controller

4.3 Place of Installation

4.5 Mounting the Controller

5.2 Notes on Cable Junctions

5.3 Power Supply

5.4 User I/O Cable Connection

5.5 Signal Cable Connection to the User I/O Board

5.6 Safety I/O Signal Cable Connection

5.7 Signal Cable Connection to the User I/O Terminal Block (When adding the optional terminal block)

6.1 Regular Inspections

6.3 Cooling Fan Inspections

6.4 Open Phase Check

7 Description of Units and Circuit Boards

7.1 SERVOPACK (JZRCR-ASV01B-1, JZRCR-ASV02)

7.2 Differential Converter Circuit Board (JARCR-AIF11-E)

8 Replacing Parts

8.1 Replacing the Power Supply Contactor Unit (JZRCR- APU04-□)

8.2 Replacing the SERVOPACK (JZRCR-ASV01B-1, JZRCR- ASV02)

8.3 Replacing Cooling Fans in the Controller (-G11, -G12)

8.4 Replacing the Rear Fans (-G16, -G17, -G18)

8.5 Replacing Cooling Fans in the Regenerative Resistor Box (-G19, -G20, -G21, -G22)

8.6 Connecting the Fan Cable of the Cooling Fan (-G14 to -G22)

8.7 Replacing CPU Reset Timer (-KT1) (Setting Timer)

9 Alarm Message List

9.1 Alarm Message List (-TA2, -TA3, -TA4)

10 Recommended Spare Parts

10.1 Recommended Spare Parts

Comments

0 comments

Article is closed for comments.