Skip to main content

Search

MOTOMAN-MPO10 INSTRUCTIONS FOR EXPLOSION-PROOF SPECIFICATIONS (R2)

  • Updated

1 Indications on Electric Equipment

1.1 FM APPROVED Label and Warning Label

1.2 Standards

2 System Configuration

2.1 Manipulator

2.1.1 Basic Specifications

2.2 DX200

2.3 Pressure Switch Unit

3 Installation

3.1 Requirements

3.2 Installation Site

3.3 Transport and Installation

3.3.1 Preparation

3.3.2 Receiving

3.3.3 Installation

3.3.3.1 Installation of Safeguarding

3.3.3.2 Mounting Procedures for Manipulator Base

3.3.3.3 Mounting the Manipulator on the Baseplate

3.3.3.4 Location

3.3.3.5 DX200 and Programming Pendant

3.3.3.6 Safety Devices

4 Connection

4.1 Wiring

4.1.1 Grounding

4.2 Cable Connection

4.3 Wiring Diagram

5 Operation (Initial Startup Included)

5.1 Enclosure Protection Sequence.

6 Frequent Inspections

7 Maintenance and Inspection

Was this article helpful?
0 out of 0 found this helpful
Return to top

Related articles

Comments

0 comments

Article is closed for comments.