1.1 Overview of Arc Visualizer
1.1.1 Robot Operation Information Window
1.1.2 Weld Work History Window
1.2 Welding Data That Can Be Acquired
1.6.3 Combined Usage with Other YCP Add-Ons
2.1.1 Check the Robot Controller Version
2.1.2 Set the Workpiece Kind Numbers
2.1.4 Set the Welding Bead Numbers
2.1.5 Set the Welding Data Output Register Addresses
2.1.6 Set Welding Segment Clipping When Using Fronius TPS and TPSi
2.2.2.1 Install the DLL and DA
2.2.3 Configure the Data Collection Settings
2.2.3.3 Register the Data Collection Settings in the Robot Controller
2.2.4 Configuring Arc Visualizer
2.2.4.1 Configure the Welding Power Supply Model
2.2.4.2 Import the Display Settings File
3 Start Procedure for Data Collection
3.3 Start the RobotDC Measurements
4.2 Disconnect the Connection to RMS
5 Windows and Operation Methods
5.1 Actual Work Information Window
5.1.1 Actual Work Monitor Window
5.1.2 Robot Controller Information Window
5.1.3 Welding Peripherals Window
5.1.3.2 Setting Individual Window / Setting All Window
5.2.1 Weld Work History Window (List)
5.2.2 Weld Work History Window (Welding Waveform)
5.3.1 Alarm History Window (List)
5.3.2 Alarm History Window (Result of Analysis)
6.1 Welding Work History List CSV File
Comments
0 comments
Article is closed for comments.