1.6.2 Input / Output (I/O) Options
1.7 Positioner Technical Specifications
1.8 Customer Support Information
2.1.2 Recommended List of Hand Tools and Equipment
2.3 Remove the Positioner from the Shipping Skid
2.4 Place and Anchor the Positioner
2.5 Connect the Positioner to the Controller
2.6 Customer-Supplied Tooling Fixtures
3.2 Recommended Spare Parts List
3.3 How to Order Spare or Replacement Parts
3.7 Main (Sweep) Axis Reduction Gear Unit
3.8 Tooling (Orbital) Axis Reduction Gear Units
3.9 Main (Swing) Axis Hardstops
3.10.1 Inspection and Cleaning of Carbon Brushes
3.10.2 Ground Brush Replacement
3.10.2.2 Ground Brush Installation
3.10.3 Inspection of Welding Ground Connections
3.11 AC Servomotor Encoder Back-Up Battery
3.12.1 Setting the Main Axis (S1) to Home (Zero) Position
3.12.2 Setting the Tooling Axis (S2 & S3) to Home (Zero) Position
3.13 Positioner Inspection Schedule
Appendix A Illustrated Parts List
A.2 Illustrated Parts List (IPL)
Comments
0 comments
Article is closed for comments.