FS100 OPTIONS INSTRUCTIONS For MotomanSync (PC) (R2)

August 31, 2026 19:42
Updated

1.1 Introduction

1.3 System Configuration

1.3.1 Hardware Configuration

1.3.2 Software Configuration

1.4 Product Specifications

2 Cautions and Limitations on Specifications

3 Setup of MotomanSync PC

3.1 Product Content

3.1.1 CD Content

3.1.2 Hardware Key

3.2 Installation of MotomanSync PC

3.3 Installation of Hardware Key Driver

3.4 Execution Environment of MotomanSync PC

3.4.1 MotomanSync Function

3.4.2 Connection of Devices

3.4.3 Ethernet Communication Setting

PC Network Setting

Controller Network Setting

4 Function Specifications

4.1 Function List

4.1.1 Manipulator Control by Move Command

4.1.2 Coordinated Control

4.1.3 Independent Control

4.1.4 Active Command Function

4.1.4.1 JOG Mode

4.1.4.2 Adjust Mode

4.1.5 Servo Power Supply

4.1.6 Rapid Stop

4.1.7 Speed Override

4.1.8 File Access

4.1.9 Variable Access

4.1.10 Current Value Monitoring

4.1.11 Alarm Control

4.1.12 I/O Control

4.1.13 JOB Start and Stop

4.1.14 Speed Limit

4.1.15 System Configuration Monitor

5 Error and Alarm List

Comments

0 comments

Article is closed for comments.