2.2 Shipping Bolts and Brackets
3.2 Mounting Procedures for Manipulator Base
4.2.1 Connection to the Manipulator
5.2 Part Names and Working Axes
5.3 Manipulator Base Dimensions
5.4 Dimensions and P-Point Maximum Envelope
5.5.1 Components for Altering Operating Range
5.5.2 Notes on the Mechanical Stopper Installation
5.5.3 Adjustment to the Pulse Limitation of S-Axis
6 Allowable Load for Wrist Axis and Wrist Flange
7.1 Peripheral Equipment Mounts
7.2 Internal User I/O Wiring Harness and Air Hose
8.1.1 Specification of Limit Switch
8.1.2 Position of Limit Switch
8.1.3 Setting of Operation Range
8.1.3.1 S-Axis Operation Range
8.1.3.2 L-Axis Operation Range
8.1.3.3 Setting Range of LU-Axes Interference Angle
9.2 Notes on Maintenance Procedures
9.2.1 Battery Pack Replacement
9.3 Notes on Grease Replenishment/Exchange Procedures
9.3.1 Grease Replenishment/Exchange for S-Axis Speed Reducer
9.3.2 Grease Replenishment/Exchange for L-Axis Speed Reducer
9.3.3 Grease Replenishment/Exchange for U-Axis Speed Reducer
9.3.4 Grease Replenishment/Exchange for U-Arm
9.3.4.1 Grease Replenishment for R-, B-, T-Axes Gears in the Casing
9.3.4.2 Grease Replenishment for R-Axis Speed Reducer
9.3.4.3 Grease Replenishment for B-Axis Speed Reducer
9.3.4.4 Grease Replenishment for T-Axis Speed Reducer
9.3.4.5 Grease Exchange for R-, B-, and T-Axes Gears in the Casing
9.3.4.6 Grease Exchange for R-Axis Speed Reducer
9.3.4.7 Grease Exchange for B-Axis Speed Reducer
9.3.4.8 Grease Exchange for T-Axis Speed Reducer
9.3.5 Grease Replenishment for Balancer Connection Part
Comments
0 comments
Article is closed for comments.