1.3.1 YASKAWA Supplied Components
1.3.2 Customer Supplied Components (user or 3rd party)
1.5 Customer Support Information
2.1.2 Setting IP Address and Port Number in the Robot
2.2 Laser Profiler Controller Setup
2.2.2 Booting up the LJ-X Controller in 2D mode
2.2.3 Creating a Profiler Pendant App Program (if required)
2.2.4 Setting Network Configuration (if required)
3 Understanding the Pendant Interface
3.1 Programming Pendant Display
3.1.2 Programming Pendant Boot Up Interface
4.2 Checking and Modifying Laser Projection Angle
4.3 Check and Adjust Profile Placement
Comments
0 comments
Article is closed for comments.