1 MOTOPAC Equipment Configuration
1.1.1 Small Galvano Scanner Head Specifications
2.1 Small Galvano Scanner Head Installation
2.2 Process Fiber Installation
2.3 Small Galvano Scanner Head Hose Installation
2.4 Connections to Manipulator
2.6.1 Setting Safety Functions
2.6.1.1 Setting the Safety Logic Circuit
2.6.1.2 Setting the Tool Angle Monitor Function
2.6.2 Setting Maximum Output of the Laser Oscillator
3 Periodic Inspection and Maintenance
3.1 Daily Inspection and Maintenance
3.2 Periodic Inspection and Maintenance
3.3 List of Inspection and Maintenance Items
3.4 Unit Replacement Procedures
3.4.1 Replacement Procedure for the Protective Glass
3.5 Tool Data Adjustment Method When Replacing the Small Galvano Scanner Head
3.6 If the Small Galvano Scanner Head Hits a Peripheral Device or Other Object
Comments
0 comments
Article is closed for comments.