DX200 AIR PANEL INSTRUCTIONS FOR Analog specification: EtherNet / IP communication (R1)

October 05, 2026 20:10
Updated

1.1 System Configuration

2 Basic Specification

2.1 Basic Specification

2.1.1 1-gun/2-guns Specifications

2.1.2 3-guns/4-guns Specifications

2.2 Outline Drawing

2.2.1 1-gun Specifications

2.2.2 2-guns Specifications

2.2.3 3-guns Specifications

2.2.4 4-guns Specifications

2.3 Air Distribution Diagram (Example of 1-gun Specifications)

2.4 Elementary Wiring Diagram (Example of 1-gun Specifications)

2.5 Signal Assignment

3.1 Installing on DX200

3.1.1 1-gun/2-guns Specifications

3.1.2 3-guns/4-guns Specifications

3.2 Single AIR PANEL

4.1 Cable Connection

4.2 Air Connection

5 How to Operate

5.1 Preparation for Use of I/F Panel and Dedicated JOB

5.2 How to Operate the I/F Panel

5.2.1 Operation Preparation of the I/F Panel

5.2.2 Manual Output

5.2.3 Move to a Registered Posture

5.2.4 Discharge Amount Measurement

5.2.6 Management Function

5.2.7 Other Functions

5.3.1 Setting Painting Conditions by Macro Command

5.3.1.1 1-gun/2-guns Specifications

5.3.1.2 3-guns/4-guns Specifications

5.3.2 Setting Painting Conditions by PAINTSET Command

6 Maintenance and Inspection

6.1 Inspection Schedule

7 Recommended Spare Parts

Comments

0 comments

Article is closed for comments.