Skip to main content

Search

MOTOPOS-S500E POSITIONER INSTRUCTIONS (R1)

  • Updated

1 Receiving

1.1 Contents Confirmation

1.2 Order Number Confirmation

2 Transportation

2.1 Transporting Method

2.1.1 Using a Crane

3 Installation

3.1 Installation of the Safeguarding

3.2 Mounting Procedures for MOTOPOS Baseplate

3.2.1 When Installing the MOTOPOS and Manipulator on a Common Baseplate

3.2.2 When Installing the MOTOPOS Directly on the Floor

3.3 Location

4 Wiring

4.1 Grounding

4.2 Cable Connection

4.2.1 Connection to the MOTOPOS

4.2.2 Connection to the DX100/DX200

4.2.3 Connection to the YRC1000

5 Basic Specifications

5.1 Basic Specifications List

5.2 Part Names and Working Axes

5.3 Baseplate Dimensions

5.4 Dimensions and Working Envelope

6 Load Specifications and Jig Mounting Section

6.1 Allowable Load

6.2 Details of Jig Mounting Face

7 System Application

7.1 Internal User I/O Wiring Harness and Air Line

7.2 Minus Cable for Welding

8 Electrical Equipment Specification

8.1 Overrun Limit Switch (Optional)

8.2 Internal Connections

9 Maintenance and Inspection

9.1 Inspection Interval

9.2 Notes on Maintenance Procedures

9.2.1 Battery Pack Replacement

9.2.2 Grease Replenishment/Exchange for Speed Reducer

9.2.2.1 Grease Replenishment

9.2.2.2 Grease Exchange

10 Recommended Spare Parts

Was this article helpful?
0 out of 0 found this helpful
Return to top

Comments

0 comments

Article is closed for comments.