1.1 Robot Data Change Point Notification
1.7 Issuing and Setting the License
1.8.1 Number of Robot Controller Connections
1.8.2 Backup Data Collection Settings
2 How to Use the Robot Data Change Point Notification
2.2 Items to Check before Setup
2.3 Installing the DA Application Software
2.4 Installing the DW Application Software
4 Backup Data Collection by RMS
4.2 Collecting and Executing the Backup Data
5 DA Application Software (DA App)
5.1 Executing the DA Application Software
5.2 Processing the DA Application Software
5.3 Exiting the DA Application Software
6 DW Application Software (DW App)
6.1 Viewing the Data Analysis Results
6.2 Exiting the DW Application Software
7 Robot Data Change Point E-mail Notification Function
7.1 Overview of the Robot Data Change Point E-mail Notification Function
7.2 Differences Between the E-mail Configuration Methods
8 Setting Procedure for the Robot Data Change Point E-mail Notification Function [Previous Method]
8.1 Settings in the DA Application Software
8.2 Setting the DW Application Software
9.1 Configure the YASKAWA Cockpit Backup Schedule
9.2 Connecting to the Robot Controller and Waiting for the Scheduled Backup
10 Setting Procedure for the Robot Data Change Point E-mail Notification Function [New Method]
10.1 Settings in YASKAWA Cockpit
10.2 Precautions for the New Method
11.1 Checking [Destination Settings] in YASKAWA Cockpit
11.2 Saving E-mail Settings in the DA App for Robot Data Change Point Notification
11.3 Configure the YASKAWA Cockpit Backup Schedule
11.4 Connecting to the Robot Controller and Waiting for the Scheduled Backup
12 Detailed Specifications and Precautions
12.1 Change Points Subject to Notification
12.2 Character Limits on Entered Values
Comments
0 comments
Article is closed for comments.