1.3 Checking the Station Number
3.1 Installation of the Safeguarding
3.2 Mounting Procedures for MOTOPOS Baseplate
3.2.1 In case of Installing the MOTOPOS and Manipulator on a Common Baseplate
3.2.2 In Case of Mounting the MOTOPOS on the Floor
4.2.1 Connection to the MOTOPOS
4.2.2 Connection to the YRC1000
4.2.3 Protrusion Amount of MOTOPOS Cables
5.2 Part Names and Working Axes
5.4 Dimensions and Working Envelope
6 Load Specifications and Jig Mounting Section
6.2 Details of Jig Mounting Face
7 Electrical Equipment Specification
8.2 Notes on Maintenance Procedures
8.2.1 Battery Pack Replacement
8.2.2 Grease Replenishment/Exchange for Speed Reducer
8.2.2.1 Notes on Grease Exchange Procedures
Comments
0 comments
Article is closed for comments.