Robot Manager

1 Introduction
2 Installation
    2.1 Components
        2.1.1 System Requirements
        2.1.2 Installation
        2.1.3 Uninstall
3 Setup
    3.1 Network Requirements
        3.1.1 NX100 Robot Controller Ports
        3.1.2 DX100 and Newer Robot Controller Ports
4 Robot Configuration
    4.1 Command Remote
5 Password Management
    5.1 Changing Password
    5.2 Logging In
6 Robot Manager Functions
    6.1 Robot Manager
        6.1.0.1 Robot drop down box
        6.1.0.2 READ ONLY/READ WRITE button
    6.2 Status
    6.3 Job Information
    6.4 Files Tab
        6.4.1 Files List
            6.4.1.1 Refresh button
            6.4.1.2 Save Local button
            6.4.1.3 Delete button
        6.4.2 File Editor
            6.4.2.1 Load As button (JBI Files)
            6.4.2.2 Load button (Upload contents of “File Editor” to robot]
            6.4.2.3 Load button (Upload file from PC to Robot)
    6.5 Live Monitor Tab
        6.5.0.1 Item to monitor
        6.5.0.2 Item index/address
        6.5.0.3 Assigned Name
        6.5.0.4 Value
        6.5.0.5 Robot Position Variable Detail - {Variable Index}
    6.6 I/O Tab
        6.6.0.1 I/O Word window
        6.6.0.2 Refresh button
    6.7 Variables Tab
        6.7.0.1 Update button
        6.7.0.2 Refresh button
    6.8 Alarm History Tab
        6.8.0.1 Alarm Reset button
        6.8.0.2 Error Clear button
    6.9 Backup Tab
        6.9.1 Backup Set
            6.9.1.1 Rename button
            6.9.1.2 Delete button
        6.9.2 What to Backup
            6.9.2.1 Refresh button
        6.9.3 When to Backup
        6.9.4 Where to Backup
            6.9.4.1 Destination is a Network Folder
            6.9.4.2 Create Dated SubFolders check box
            6.9.4.3 Create File Type Folders check box
        6.9.5 Backup Now button
            6.9.5.1 Run Scheduler Now button
            6.9.5.2 Save button
        6.9.6 View Backup Status
    6.10 Restore Tab
    6.11 Job Info Tab
7 Troubleshooting