EtherNet/IP Setup with a Omron NX/NJ PLC

The document attached is a setup guide which applies to the EtherNet/IP option for the DX100, DX200, YRC1000 or YRC1000micro.  The guide is intended to help document the setting and finalize the configuration using Omron's Sysmac Studio software.

A project file for Sysmac Studio is also attached, this corresponds to sequences in the guide.

NOTE -- You cannot complete the standard EDS file configuration inside of the Sysmac Studio software, you have to use Omron's Network Configurator software instead. See the document attached and titled:  NX102 to Yaskawa YRC1000 connection issue.doc for more information.  This document is from Omron and discusses the issues with Sysmac Studio and why using the Network Configurator software will fix the issue.